|Place of Origin:||CHINA|
|Minimum Order Quantity:||1|
|Application:||Mine, Metallurgy, Building Material, Highway, Railway, Etc., Coal, Limestone||Capacity(t/h):||200-300t/h|
Deep crushing chamber Jaw Crusher Machine Used In Quarry / Metallurgy
Jaw Crusher Product Description:
jaw crusher mainly consists of frame, eccentric shaft, jaw plate, connecting bar, adjustment part and spring. The movable jaw goes upward and downward through eccentric shaft when belt and belt wheel are driven by the motor. The angle between movable jaw and bracket turns big when the movable jaw goes upward, which pushes the movable jaw plate to come close to fixed jaw plate. At the same time, materials are crushed with the movement of the movable jaw.
Jaw crusher, can be divided into large, medium and small size according to the treatmen capacity. The feed opening is composed of two jaw plates of moving jaw and jaw plate, which is a crushing chamber simulating the two jaw movement of the animals to complete the material broken. Widely used in mining, building materials, roads, railways and water conservancy in a variety of ore and bulk materials of medium or small particle size.
The motor transmits through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when mobile jaw moving. So the mobile jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.
Jaw crusher is ideal for primary and secondary crushing, and is widely used in mining, quarry, ore, metallurgy, building, highway, railway, construction waste processing, water conservancy and chemical industry, etc. The jaw crusher is capable to crush mineral ores, rocks, and slag with crush strength less than 280Mpa. And size of materials fed in the stone jaw crusher should be equal or smaller than the maximum feeding size described in the following technical data.